Syllabus

Select major*

Ternopil Ivan Puluj National Technical University

Факультет інженерії машин, споруд та технологій

Кафедра технічної механіки та сільськогосподарських машин

Machine Parts

syllabus

Major 131 - Прикладна механіка (бакалавр)
Field of knowledge 13 Механічна інженерія
Academic degree bachelor's
Course
Course type required
special education
Study start course 3
Semesters From 5 — to 6
Form of education full-time
Study hours structure
68– lectures
50– practical classes
Amount of hours for individual work 120
ECTS credits 8
Form of final examination credit
exam
coursework
Lecturer
Academic degree Cand. Sc.
Academic title Assoc. Prof.
Full name Сташків Микола Ярославович
Course goals and learning objectives
This course covers theoretical and practical design of machine parts and simple systems. Includes the integration of the basic engineering disciplines necessary for proper analysis, synthesis and design of structures, simple machines or processes, including screws, springs, bearings and gearing. Establishment of design criteria based on stress and fatigue analysis and on experimental results, statistical considerations, materials, steady and variable loading. 
Course description
Lectures 1. Machine Design
2. Engineering materials and their properties
3. Stress and Strain in Machine Parts
4. Riveted Joints
5. Welded Joints
6. Screwed Joints
7. Keys and Coupling
8. Shafts
9. Sliding Contact Bearings
10. Rolling Contact Bearings (RCB)
11. Spur Gears
12. Helical Gears
13. Bevel Gears
14. Worm Gears
15. Flat Belt Drives
16. Flat Belt Pulleys
17. V-Belt and Rope Drives
18. Chain Drives
19. Flywheel
20. Springs
Practical classes 1. Stress and Strain determination
2. Design Riveted Joints
3. Design Welded Joints
4. Design Screwed Joints
5. Design Keys and Coupling
6. Design Shafts
7. Design Sliding Contact Bearings
8. Design Rolling Contact Bearings
9. Design Spur Gears
10. Design Helical Gears
11. Design Bevel Gears
12. Design Worm Gears
13. Design Flat Belt Drives and Pulleys
14. Design V-Belt and Rope Drives
15. Design Chain Drives
16. Design Flywheel
17. Design Springs
Assessment criteria
In each semester the current control consists of two modules, where the theoretical part is 20 points, the practical part - 17-18 points.
In the fifth semester, the form of final control is a test.
In the sixth semester, the form of final control is an exam. 
Recommended reading list. Subject Resources
1. Design of Machine Elements – V.B. Bhandari / New Delhi, 2010. – 935 p.
2. Machine Design – R.S. Khurmi and J.K. Gupta / New Delhi, 2010. – 1250 p.
3. Machine Elements in Mechanical Design – Robert L. Mott / New Jersey. – 872 p.
4. Fundamentals of Machine Design – Andrzej Golenko / Wroclaw University of Technology, 2010. – 175 p.
5. Machines Device and Components. Illustrated Sourcebook – Robert O. Parmley / Wisconsin, 2004. – 428 p.
6. Manual gearbox design – Alec Stokes / Manchester, 1992. – 162 p.
7. The Theory and Practice of Worm Gear Drives – Illes Dudas / London. – 314 p.+
8. М. Stashkiv, O. Tson. Design of Gear Boxes. Calculation and design case example. – The manual for students of Faculty of Engineering of Machines, Structures and Technologies (speciality 131 Applied Mechanics). – Ternopil, 2018. – 84 р. 
Course author
Cand. Sc., Assoc. Prof. Сташків Микола Ярославович 
Дата останнього оновлення: 2020-11-10 18:36:28